SkyCenter One, Tampa Airport, Tampa, FL

April 23, 2021


Location: Tampa, FL USA
Products: CAFCO® 300 HS / ISOLATEK® Type 300 HS, CAFCO 400 / ISOLATEK Type 400, CAFCO® SprayFilm WB 3 / ISOLATEK Type WB 3, and CAFCO FENDOLITE® M-II / ISOLATEK Type M-II

Tampa Airport is continuously expanding to allow travelers a manageable and smooth way to work and travel. The SkyCenter One is a 272,000-square-foot nine-story office building in a prime spot connected by an elevated pedestrian walkway from the SkyCenter atrium and the SkyConnect train station and Rental Car Center. The building will include a conference center, fitness center, café, and access to multipurpose trails. The new office building also allows the Airport to demolish the existing offices near the Main Terminal to reclaim the space to accommodate future growth.

Isolatek International, the industry leader in the marketing and manufacturing of passive fire protection materials for the construction industry, supplied our recognized applicator TruTeam with CAFCO 300 HS / ISOLATEK Type 300 HS, CAFCO 400 / ISOLATEK Type 400 , and CAFCO FENDOLITE M-II / ISOLATEK Type M-II Spray Applied Fireproofing Material. CAFCO 300 HS / ISOLATEK Type 300 HS offers the option of specifying a Commercial Density product to meet Section 403.2.4 of the IBC High Rise Building requirement for minimum bond strength. This product acts as a thermal insulator allowing savings in roof insulation. CAFCO 300 HS / ISOLATEK Type 300 HS also eliminates the need for daily priming and flushing out of lines. CAFCO 400 / ISOLATEK Type 400 has exceptional adhesion properties that ensure long-term performance. CAFCO FENDOLITE M-II / ISOLATEK Type M-II is the industry’s leading High-density Wet Mix Spray-Applied Fire Resistive Material (SFRM) designed to provide fire protection for structural steel and concrete. Its Portland cement formulation, thermal performance, and proven superior durability, and ease of application makes ensures applicators are spraying the best.

Dannix Painting applied our CAFCO SprayFilm WB 3 / ISOLATEK Type WB 3 in the SkyCenter Atrium. CAFCO SprayFilm WB 3 / ISOLATEK Type WB 3 provides additional levels of coverage and competitive thickness requirements in the industry. It provides architects the ability to design using steel that can be decorative and aesthetically pleasing while maintaining the required fire-resistance rating. It also allows for easier application and is an environmentally friendly product.

CAFCO BLAZE-SHIELD II HS / ISOLATEK Type II HS sprayed to the steel inside the SkyCenter One building by recognized applicator Architectural Coatings. CAFCO BLAZE-SHIELD II HS / ISOLATEK Type II HS a Commercial Density product to meet the current IBC® SFRM minimum bond strength requirement of 430 psf for building heights ranging from 75′ to 420′. CAFCO BLAZE-SHIELD II HS / ISOLATEK Type II HS is a cement-based, Dry Mix Spray-Applied Fire Resistive Material specifically designed to provide high bond strength along with exceptional cost-effective thermal performance. The Dry Mix formulation eliminates the need to wash out pumps at end of the day, reducing water requirements and waste. The added R-value can contribute to a reduction in roof insulation. We provide our customers with the best life safety materials for steel that will save lives in the event of a fire.



About Isolatek International

Isolatek International is the world leader in passive fire protection technology, developing, manufacturing, and delivering fire resistive solutions that protect structures and ultimately save lives. Its spray-applied fire-resistive materials, intumescent spray-applied fire resistive materials, rigid board, primer-sealers, and topcoats are rigorously tested and certified by world renowned authorities and agencies. Isolatek products are used globally and specified by architects, engineers, and embraced by general contractors for projects within the commercial, petrochemical and tunnel industries. ISOLATEK INTERNATIONAL provides passive fireproofing materials under the CAFCO® and FENDOLITE® trademark throughout the Americas and under the ISOLATEK® trademark throughout the world.
For more information, visit
ISOLATEK, ISOLATEK INTERNATIONAL, and CAFCO are registered trademarks of Isolatek International.

Katelyn Wood, Marketing Specialist
Isolatek International

ISOLATEK INTERNATIONAL provee materiales de protección pasiva contra fuego bajo la marca CAFCO® y FENDOLITE® en las Americas y bajo la marca ISOLATEK® en el resto del mundo.

Isolatek International
41 Furnace Street
Stanhope, NJ 07874
800-631-9600 | +1 973-347-1200

© 2020 Isolatek International, Todos los derechos reservados.