General Assembly Building of Virginia

July 2, 2021


Location: Richmond, VA

Products: CAFCO® 300 HS / ISOLATEK® Type 300 & CAFCO 400 / ISOLATEK Type 400


The General Assembly Building, located in Richmond, VA, originally had four different architectural styles. Projected for completion in 2021, the lower four floors of the 400,000 square-foot building. The original structure facade built in 1912 was kept intact while the rest of the building has been demolished. The design emphasizes a stepped exterior to mirror other traditional architecture found in Richmond.  


Isolatek International’s recognized applicator, American Coatings, was elected to the project. CAFCO 300 HS / ISOLATEK Type 300 HS & CAFCO 400 / ISOLATEK Type 400 were applied to protect the General Assembly building. CAFCO 300 HS / ISOLATEK Type 300 HS a gypsum-based, Wet Mix Spray-Applied Fire Resistive Material specifically designed to provide high bond strength. CAFCO 400 / ISOLATEK Type 400 is a Portland cement-based formulation that protects virtually any environment where a medium density material is specified. The thermal performance advantages of CAFCO 400 / ISOLATEK Type 400 result in decreased installed expenses and render industry-leading physical performance and application efficiencies that are unequaled. Both products have outstanding, cost-effective thermal performance, provide up to 4 hours ratings on various building areas, and contribute to LEED Credits. 


The new construction will include a cafeteria, spaces for committees, and subcommittees. There will be public spaces for people coming to visit and observe the General Assembly. When finished, there will also be a tunnel connecting the building to a parking garage.  


About Isolatek International

Isolatek International is the world leader in passive fire protection technology, developing, manufacturing, and delivering fire resistive solutions that protect structures and ultimately save lives. Its spray-applied fire-resistive materials, intumescent spray-applied fire-resistive materials, rigid board, primer-sealers, and topcoats are rigorously tested and certified by world-renowned authorities and agencies. Isolatek products are used globally and specified by architects, engineers and embraced by general contractors for projects within the commercial, petrochemical, and tunnel industries. ISOLATEK INTERNATIONAL provides passive fireproofing materials under the CAFCO® and FENDOLITE® trademark throughout the Americas and under the ISOLATEK® trademark throughout the world.
For more information, visit

ISOLATEK, ISOLATEK INTERNATIONAL, and CAFCO are registered trademarks of Isolatek International.

Katelyn Wood, Marketing Specialist
Isolatek International

ISOLATEK INTERNATIONAL provides passive fireproofing materials under the CAFCO® and FENDOLITE® trademarks throughout the Americas and under the ISOLATEK® trademark throughout the world.

Isolatek International
41 Furnace Street
Stanhope, NJ 07874
800-631-9600 | 973-347-1200

© 2022 Isolatek International, All Rights Reserved.